Skip to main content

Encompass System (ES) Snap Advanced Custom Programming
CCE ES SNAP ADV

The ES Snap Advanced Custom Programming course is the third in the Controls Expert Training Series. After successfully completing this course, you will be able to use Carrier's Snap tool to quickly and efficiently create basic control programs, symbol libraries, commission a control program, use Snap productivity tools, demonstrate ZS Sensor logic, translate PID Loop Control and create an advanced control program with a custom sequence of operation.


duration cost format course prerequisites
2 days $700 classroom must be CS/IS certified

The ES Snap Advanced Custom Programming course is the third in the Controls Expert Training Series. After successfully completing this course, you will be able to use Carrier's Snap tool to quickly and efficiently create basic control programs, symbol libraries, commission a control program, use Snap productivity tools, demonstrate ZS Sensor logic, translate PID Loop Control and create an advanced control program with a custom sequence of operation.

For more information on the Carrier Controls Expert Program, please contact your local Carrier Controls representative or visit www.carrier.com/controls-experts.

Who should attend this training

Carrier field technicians and engineers who are looking to better utilize their skills with Snap.

Learning Objectives

After successfully completing this course, you will be able to use Carrier’s Snap tool to quickly and efficiently

  • Create basic control programs
  • Use programming and naming standards
  • Create a symbol library
  • Commission a control program
  • Use Snap productivity tools
  • Demonstrate ZS Sensor logic
  • Translate PID Loop Control
  • Make major edits to an existing control program
  • Create an advanced control program with a custom sequence of operation

Training Methods Used

This course is instructor-led in a classroom setting with extensive hands-on tasks to present the material. Student’s achievement of the learning objectives is determined by successful completion of the course, and final written exam.

Topics Covered

All times are approximate and shown as (classroom hours/lab or workshop hours).

Snap Fundamentals

  • Verify option settings 
  • Save a control program 
  • Place the microblocks 
  • Connect microblocks with wires 
  • Edit microblock properties 
  • Simulate the control program

Real World Programming - Part I

  • Create a logic symbol
  • Create a control program using EquipmentBuilder
  • Decipher a control program
  • Modify a control program

SNAP tools (1.0/1.0)

  • Info
  • Find
  • Edit Common Properties
  • Palette

EZS Sensors

Define PID Control

Real World Programming - Part II

  • Final project

MUST BE CS/IS CERTIFIED

Materials Needed

Student must have an account in HVACpartners prior to the class start date. Please contact your local Carrier Sales Office to create an account.

Software

Operating systems must have Administrative Rights on the following software:

  • Windows 10 Pro (32 or 64-bit)
  • Windows 8 Enterprise or Professional (32 or 64 bit) OR Windows 7 Pro or Ultimate (32 or 64 bit)
  • Need Adobe Reader preinstalled before class -- free download here

Class hours

Classes run 8am-5pm EDT.

Location & lodging

Kennesaw, Georgia, unless noted otherwise. An email with directions to the facility and lodging information will be provided once the class is confirmed, approximately 3 weeks prior to start date.

The ES Snap Advanced Custom Programming course is the third in the Controls Expert Training Series. After successfully completing this course, you will be able to use Carrier's Snap tool to quickly and efficiently create basic control programs, symbol libraries, commission a control program, use Snap productivity tools, demonstrate ZS Sensor logic, translate PID Loop Control and create an advanced control program with a custom sequence of operation.

For more information on the Carrier Controls Expert Program, please contact your local Carrier Controls representative or visit www.carrier.com/controls-experts.

Who should attend this training

Carrier field technicians and engineers who are looking to better utilize their skills with Snap.

Learning Objectives

After successfully completing this course, you will be able to use Carrier’s Snap tool to quickly and efficiently

  • Create basic control programs
  • Use programming and naming standards
  • Create a symbol library
  • Commission a control program
  • Use Snap productivity tools
  • Demonstrate ZS Sensor logic
  • Translate PID Loop Control
  • Make major edits to an existing control program
  • Create an advanced control program with a custom sequence of operation

Training Methods Used

This course is instructor-led in a classroom setting with extensive hands-on tasks to present the material. Student’s achievement of the learning objectives is determined by successful completion of the course, and final written exam.

Topics Covered

All times are approximate and shown as (classroom hours/lab or workshop hours).

Snap Fundamentals

  • Verify option settings 
  • Save a control program 
  • Place the microblocks 
  • Connect microblocks with wires 
  • Edit microblock properties 
  • Simulate the control program

Real World Programming - Part I

  • Create a logic symbol
  • Create a control program using EquipmentBuilder
  • Decipher a control program
  • Modify a control program

SNAP tools (1.0/1.0)

  • Info
  • Find
  • Edit Common Properties
  • Palette

EZS Sensors

Define PID Control

Real World Programming - Part II

  • Final project

MUST BE CS/IS CERTIFIED

Materials Needed

Student must have an account in HVACpartners prior to the class start date. Please contact your local Carrier Sales Office to create an account.

Software

Operating systems must have Administrative Rights on the following software:

  • Windows 10 Pro (32 or 64-bit)
  • Windows 8 Enterprise or Professional (32 or 64 bit) OR Windows 7 Pro or Ultimate (32 or 64 bit)
  • Need Adobe Reader preinstalled before class -- free download here

Class hours

Classes run 8am-5pm EDT.

Location & lodging

Kennesaw, Georgia, unless noted otherwise. An email with directions to the facility and lodging information will be provided once the class is confirmed, approximately 3 weeks prior to start date.