Load Calculation for Commercial Buildings Utilizing Legacy HAP v5.11 SSN-V 001
Load Calculation for Commercial Buildings Utilizing Legacy HAP v5.11
SSN-V 001
This class is for consulting engineers and others performing building load calculations. The class also covers cooling and heating loads for commercial buildings using the legacy version of HAP v5.11 load calculation software.
- Learn the fundamentals of design weather data, scheduling of loads, defining building parameters, and modeling various air system and plant types
- Systems covered include VRF, Single Zone Constant Volume, Variable Air Volume and Terminal air systems
- Calculate heating and cooling loads for commercial buildings in order to properly size the HVAC system
| duration | cost | format |
|---|---|---|
| 6 hrs | $50 | online |
Registration is FREE to all current Carrier eDesign license holders.
Qualifying eDesign software programs include: HAP, Block Load, BSO, EEA, SDL, and Refrigerant Piping Design. If you are a current license holder, an email has been sent to the address we have on file for your account with a discount code for this training.
If you have not received your discount code and are a current license holder, please contact [email protected]
This live course covers cooling and heating loads for commercial buildings using load calculation software. Students learn the fundamentals of design weather data, scheduling of loads, defining building parameters, and modeling various air system and plant types. Completion of the load calculation workshops is mandatory. The class manual furnished to each student includes detailed workshops for defining Single Zone Constant Volume, Variable Air Volume and Terminal air systems as part of the course. Students who complete this course are able to calculate heating and cooling loads for commercial buildings in order to properly size the HVAC system.
This class is held virtually via Zoom as 2 half-day sessions. Each session is from 9:00 AM—12:00 PM EST. Zoom meeting instructions and class agenda will be sent out prior to the first day of class.
Carrier University is authorized by IACET to offer .6 CEUs for this program. This IACET CEU is equivalent to 6.0 PDH’s.
Who should attend this training
This course is for HVAC designers who use load calculation software to calculate heating and cooling loads in commercial buildings. A working knowledge of building design and computer skills is required.
Learning Objectives
At the conclusion of this course each student should be able to:
- Successfully define and input Design Weather Data for load estimating
- Define and enter construction materials and attributes
- Successfully define and enter internal load components
- Define and enter all space related information
- Describe HVAC system parameters
- Generate and properly interpret air system cooling and heating load sizing reports for proper system component sizing
Training Methods Used
This course uses a combination of classroom lecture, videos, and demonstrations and workshops to present the material. Student’s achievement of the learning objectives is determined by successful completion of the workshops, and final written exam. Workshops are instructor guided exercises using the procedures taught in the lectures.
Topics Covered
All times are approximate and shown as (instruction minutes/workshop minutes).
- Data Management (10/0)
- ASHRAE Methodologies - Transfer Functions, Zone Loads, Heat Extraction, System Loads and Coil Sizing (15/0)
- Fundamental Terminology & Program Structure (10/0)
- Project Details (10/0)
- Configuring Weather Data (15/0)
- Class Exercise (0/15)
- Schedules (10/0)
- Class Exercise (0/15)
- Library Items (10/0)
- Class exercise (0/15)
- Discussion & Workshop “Building Inputs and Modeling” (15/0)
- Building Envelope Modeling (15/0)
- Class Exercises (0/20)
- Space Inputs (15/0)
- Class Exercise (0/20)
- System Based Design Loads (15/0)
- Thermal Loads (10/0)
- Equipment Selection Design Parameters (10/0)
- Effects on outputs vs. Equipment selections (15/0)
- Air System Inputs (15/0)
- Class Exercise (0/20)
- Economizer Operation (10/0)
- Multiple Zone Air System (10/0)
- Class Exercise (0/20)
- Airflow Sizing Methods (10/0)
- Discussion & Workshop (15/0)
- “Modeling Multiple Zone Projects” (10/0)
- Class Exercise - Sample Problem # 2 - Zoning (0/20)
- Class Discussion and Exercise – Terminal Systems (5/20)
- Plant Sizing (10/0)
- Conclusions (10/0)
Completion requirements
To receive a certificate for this course student must be present for the entire course and receive a grade of 70% on graded quiz.
Prerequisite requirements
None.
Suggested background
For HVAC designers with a working knowledge of commercial air conditioning and heating systems, including lab time with service test equipment and tools. Use of load estimating software is also desirable.
Materials to bring
- This class is being delivered virtually via Zoom. Please ensure your PC has the capability of connecting to a Zoom meeting.
- While not required, it is recommended that you have the HAP software installed on your laptop. Click on Software Downloads Page for specific details.
- If you are not currently a HAP user and plan to bring your own laptop computer, request an electronic 60-day HAP demo. Click on this link: Carrier eDesign Trial Request.
Class hours
Class runs from 9:00 AM EST to 12:00 PM EST on two consecutive days.
Location & lodging
This class is virtual.
This live course covers cooling and heating loads for commercial buildings using load calculation software. Students learn the fundamentals of design weather data, scheduling of loads, defining building parameters, and modeling various air system and plant types. Completion of the load calculation workshops is mandatory. The class manual furnished to each student includes detailed workshops for defining Single Zone Constant Volume, Variable Air Volume and Terminal air systems as part of the course. Students who complete this course are able to calculate heating and cooling loads for commercial buildings in order to properly size the HVAC system.
This class is held virtually via Zoom as 2 half-day sessions. Each session is from 9:00 AM—12:00 PM EST. Zoom meeting instructions and class agenda will be sent out prior to the first day of class.
Carrier University is authorized by IACET to offer .6 CEUs for this program. This IACET CEU is equivalent to 6.0 PDH’s.
Who should attend this training
This course is for HVAC designers who use load calculation software to calculate heating and cooling loads in commercial buildings. A working knowledge of building design and computer skills is required.
Learning Objectives
At the conclusion of this course each student should be able to:
- Successfully define and input Design Weather Data for load estimating
- Define and enter construction materials and attributes
- Successfully define and enter internal load components
- Define and enter all space related information
- Describe HVAC system parameters
- Generate and properly interpret air system cooling and heating load sizing reports for proper system component sizing
Training Methods Used
This course uses a combination of classroom lecture, videos, and demonstrations and workshops to present the material. Student’s achievement of the learning objectives is determined by successful completion of the workshops, and final written exam. Workshops are instructor guided exercises using the procedures taught in the lectures.
Topics Covered
All times are approximate and shown as (instruction minutes/workshop minutes).
- Data Management (10/0)
- ASHRAE Methodologies - Transfer Functions, Zone Loads, Heat Extraction, System Loads and Coil Sizing (15/0)
- Fundamental Terminology & Program Structure (10/0)
- Project Details (10/0)
- Configuring Weather Data (15/0)
- Class Exercise (0/15)
- Schedules (10/0)
- Class Exercise (0/15)
- Library Items (10/0)
- Class exercise (0/15)
- Discussion & Workshop “Building Inputs and Modeling” (15/0)
- Building Envelope Modeling (15/0)
- Class Exercises (0/20)
- Space Inputs (15/0)
- Class Exercise (0/20)
- System Based Design Loads (15/0)
- Thermal Loads (10/0)
- Equipment Selection Design Parameters (10/0)
- Effects on outputs vs. Equipment selections (15/0)
- Air System Inputs (15/0)
- Class Exercise (0/20)
- Economizer Operation (10/0)
- Multiple Zone Air System (10/0)
- Class Exercise (0/20)
- Airflow Sizing Methods (10/0)
- Discussion & Workshop (15/0)
- “Modeling Multiple Zone Projects” (10/0)
- Class Exercise - Sample Problem # 2 - Zoning (0/20)
- Class Discussion and Exercise – Terminal Systems (5/20)
- Plant Sizing (10/0)
- Conclusions (10/0)
Completion requirements
To receive a certificate for this course student must be present for the entire course and receive a grade of 70% on graded quiz.
Prerequisite requirements
None.
Suggested background
For HVAC designers with a working knowledge of commercial air conditioning and heating systems, including lab time with service test equipment and tools. Use of load estimating software is also desirable.
Materials to bring
- This class is being delivered virtually via Zoom. Please ensure your PC has the capability of connecting to a Zoom meeting.
- While not required, it is recommended that you have the HAP software installed on your laptop. Click on Software Downloads Page for specific details.
- If you are not currently a HAP user and plan to bring your own laptop computer, request an electronic 60-day HAP demo. Click on this link: Carrier eDesign Trial Request.
Class hours
Class runs from 9:00 AM EST to 12:00 PM EST on two consecutive days.
Location & lodging
This class is virtual.