Skip to main content

AquaForce® - Air Cooled Screw Chiller 30XF

Refrigerant : R-134a

Compressor : screw variable-speed

Nominal cooling capacity : 738-2520 kW

The AquaForce® 30XF air-cooled screw chiller is the premium solution using R134a designed for the data center application. The unit has the best-in-class technologies offering reduction of energy consumption while giving you continuous service.

Natively built-in solutions crafted to give you the optimal options suitable for your installation including:

  • Built-in Hydronic pump
  • Ultra fast-capacity recovery in less than 180 seconds
  • Built-in Auto Transfer Switch
  • Built-in Harmonic Electronic Filter

Designed for the Data Center

Outstanding performances :

  • High COP up to 3.3 and IPLV up to 5.6
  • Total harmonic distortion <5%
  • Carrier flooded shell-and-tube evaporator with new copper tubes for low pressure drops

Low energy consumption :

  • High Efficient chiller with latest 06Z compression technology

Service continuity & redundancy :

  • Ultra-fast cooling capacity recovery <180s once power is restored

Built-in solution :

  • Integrated ATS & active harmonic filters

SmartVu™ control

  • Intuitive and user-friendly, coloured, 7"" interface
  • 10 languages available
  • Easy access to the controller box
  • Password protection
  • Night-mode
  • Energy management

Remote management as standard

  • Easily accessed from the internet
  • Multiple remote control, monitoring and diagnostic possibilities
  • Optional communication gateways
  • Start/Stop of the machine
  • Dual set-point management
  • Water pump control
  • High static fan (120Pa)
  • High Speed fan (60Hz)
  • Low Noise (Sheet Metal enclosure )
  • Super Low Noise
  • E-coating
  • ASME Heat Exchanger
  • IP54 Control box
  • J-Bus Gateway
  • Bacnet Gateway
  • Lon Gateway
  • Energy Management Module
  • 7’’ Touch Screen
  • Remote Controller
  • EMC Classification C2
  • Ultra Fast Capacity Recovery
  • Lead/Lag Control
  • Compressor with Induction Motor
  • Water Exchanger Frost Protection
  • Evaporator and hydronic kit Anti-freeze protection
  • ATS (Automatic Transfer Switch)
  • Compressor Discharge Valves
  • 1.6Mpa Evaporator
  • Reversed Evaporator Connection
  • Evaporator with aluminium jacket
  • 38mm Evaporator Insulation
  • Spring Damping
  • Isolate valve for safety valve (Dual safety valve)
  • Flange Connection
  • AHF THiD 5% (unit mount)
  • Water side plate with aluminium spray coating

Designed for the Data Center

Outstanding performances :

  • High COP up to 3.3 and IPLV up to 5.6
  • Total harmonic distortion <5%
  • Carrier flooded shell-and-tube evaporator with new copper tubes for low pressure drops

Low energy consumption :

  • High Efficient chiller with latest 06Z compression technology

Service continuity & redundancy :

  • Ultra-fast cooling capacity recovery <180s once power is restored

Built-in solution :

  • Integrated ATS & active harmonic filters

SmartVu™ control

  • Intuitive and user-friendly, coloured, 7"" interface
  • 10 languages available
  • Easy access to the controller box
  • Password protection
  • Night-mode
  • Energy management

Remote management as standard

  • Easily accessed from the internet
  • Multiple remote control, monitoring and diagnostic possibilities
  • Optional communication gateways
  • Start/Stop of the machine
  • Dual set-point management
  • Water pump control
  • High static fan (120Pa)
  • High Speed fan (60Hz)
  • Low Noise (Sheet Metal enclosure )
  • Super Low Noise
  • E-coating
  • ASME Heat Exchanger
  • IP54 Control box
  • J-Bus Gateway
  • Bacnet Gateway
  • Lon Gateway
  • Energy Management Module
  • 7’’ Touch Screen
  • Remote Controller
  • EMC Classification C2
  • Ultra Fast Capacity Recovery
  • Lead/Lag Control
  • Compressor with Induction Motor
  • Water Exchanger Frost Protection
  • Evaporator and hydronic kit Anti-freeze protection
  • ATS (Automatic Transfer Switch)
  • Compressor Discharge Valves
  • 1.6Mpa Evaporator
  • Reversed Evaporator Connection
  • Evaporator with aluminium jacket
  • 38mm Evaporator Insulation
  • Spring Damping
  • Isolate valve for safety valve (Dual safety valve)
  • Flange Connection
  • AHF THiD 5% (unit mount)
  • Water side plate with aluminium spray coating