Skip to main content

Desert Master™
50TCM

Single-Packaged Rooftop
Electric Cooling Units
Puron® (R-410A) Refrigerant

6.0 to 12.5 nominal tons

puron-refrigerant

The 50TCM units are single side discharge rooftop cooling units utilizing electric heat as an option. Units are prewired, and pre-charged with R-410A refrigerant, and tested at the factory. These units can be placed on the side of a building or on a roof without roof curbs. Each unit is designed to occupy a minimal space, with piping and drain connections readily accessible.

Carrier’s Package Rooftop Unit software makes selecting and optimizing the 50TCM easy.

Installation Features

  • Single point electrical service entry
  • Side discharge application
  • No roof curb needed
  • Side-by-side supply and return air
  • Separate panel for control box

Performance Features

  • HFC R-410A refrigerant
  • ASHRAE 90.1 compliant
  • EER’s up to 12.2
  • TXV refrigerant metering device
  • Independent refrigerant circuits, each with a scroll compressor
  • Low outdoor temperature cooling operation down to 40°F
  • Cooling operating range up to 125 °F (51.6°C) 
  • Liquid filter drier standard on each circuit
  • Non-corrosive sloped condensate drain pan in accordance to ASHRAE 62 standard
  • Thermally protected and permanently lubricated condenser and evaporator fan motors
  • Angle type return air section with washable type filters

Environmentally Responsible Refrigerant Choice

R410A refrigerant is:

  • A chlorine-free refrigerant from the HFC group
  • Has zero ozone depletion potential
  • Thermally efficient and provides High EER (energy efficiency), COP, and part load efficiencies

Superior Reliability, Efficiency and Safety

  • Exceptional endurance tests
    • Painted panels tested to ASTM B-117 500 hours salt spray protection
    • Pre-coated fin condenser coil for extra corrosion protection
  • Compressor Protection:
    • High and low pressure cutouts
    • Phase protection relay
    • Crankcase heaters are standard for all units
    • Internal over temperature protection
    • Freeze protection
  • Low vibration design:
    • Leak-tight refrigerant circuit
    • Brazed refrigerant connections for increased leak tightness
    • Low-noise scroll compressors with low vibration levels
  • Control circuit protected by circuit breaker
  • Thermally protected and permanently lubricated condenser and evaporator fan motors
  • Angle type return air section with washable type filters
  • Transformer for safe 24v control circuit supply included
  • High efficiency, High Static Blower
  • State-of-art scroll compressor technology
  • Dual, electrically and mechanically independent refrigerant circuit

Standard Limited Warranty

  • 5 years on compressors and 2 years parts
  • Extended warranty packages available

Factory-Installed Options

  1. Refrigerant sight glass - Installed on each circuit
  2. Pre-coated fins - condenser only
  3. Copper fins - condenser only
  4. Copper fins - condenser and evaporator
  5. Multiple motor and drive packages

Field-Installed Options

  1. Electric resistance heater package
  2. Single point kit
  3. UVC ready
  4. Softbag filters

Physical Data

Unit Size Nominal Cooling Capacity (tons) AHRI Efficiency (EER) Dimensions (mm )(LxWxH) Approx Unit Weight (kg)
A07 6.0 11.2 1888x1187x1051 275
D08 7.5 12.1 2238x1510x1048 345
D09 8.5 12.2 2238x1510x1048 388
D12 10.0 11.6 2238x1510x1253 393
D14 12.5 11.0 2238x1510x1253 489

Installation Features

  • Single point electrical service entry
  • Side discharge application
  • No roof curb needed
  • Side-by-side supply and return air
  • Separate panel for control box

Performance Features

  • HFC R-410A refrigerant
  • ASHRAE 90.1 compliant
  • EER’s up to 12.2
  • TXV refrigerant metering device
  • Independent refrigerant circuits, each with a scroll compressor
  • Low outdoor temperature cooling operation down to 40°F
  • Cooling operating range up to 125 °F (51.6°C) 
  • Liquid filter drier standard on each circuit
  • Non-corrosive sloped condensate drain pan in accordance to ASHRAE 62 standard
  • Thermally protected and permanently lubricated condenser and evaporator fan motors
  • Angle type return air section with washable type filters

Environmentally Responsible Refrigerant Choice

R410A refrigerant is:

  • A chlorine-free refrigerant from the HFC group
  • Has zero ozone depletion potential
  • Thermally efficient and provides High EER (energy efficiency), COP, and part load efficiencies

Superior Reliability, Efficiency and Safety

  • Exceptional endurance tests
    • Painted panels tested to ASTM B-117 500 hours salt spray protection
    • Pre-coated fin condenser coil for extra corrosion protection
  • Compressor Protection:
    • High and low pressure cutouts
    • Phase protection relay
    • Crankcase heaters are standard for all units
    • Internal over temperature protection
    • Freeze protection
  • Low vibration design:
    • Leak-tight refrigerant circuit
    • Brazed refrigerant connections for increased leak tightness
    • Low-noise scroll compressors with low vibration levels
  • Control circuit protected by circuit breaker
  • Thermally protected and permanently lubricated condenser and evaporator fan motors
  • Angle type return air section with washable type filters
  • Transformer for safe 24v control circuit supply included
  • High efficiency, High Static Blower
  • State-of-art scroll compressor technology
  • Dual, electrically and mechanically independent refrigerant circuit

Standard Limited Warranty

  • 5 years on compressors and 2 years parts
  • Extended warranty packages available

Factory-Installed Options

  1. Refrigerant sight glass - Installed on each circuit
  2. Pre-coated fins - condenser only
  3. Copper fins - condenser only
  4. Copper fins - condenser and evaporator
  5. Multiple motor and drive packages

Field-Installed Options

  1. Electric resistance heater package
  2. Single point kit
  3. UVC ready
  4. Softbag filters

Physical Data

Unit Size Nominal Cooling Capacity (tons) AHRI Efficiency (EER) Dimensions (mm )(LxWxH) Approx Unit Weight (kg)
A07 6.0 11.2 1888x1187x1051 275
D08 7.5 12.1 2238x1510x1048 345
D09 8.5 12.2 2238x1510x1048 388
D12 10.0 11.6 2238x1510x1253 393
D14 12.5 11.0 2238x1510x1253 489