AquaForce® - Air Cooled screw chiller
Refrigerant : R-134a
Compressor : screw variable-speed
Nominal cooling capacity : 738-2520 kW
The AquaForce® 30XF air-cooled screw chiller is the premium solution using R134a designed for the data center application. The unit has the best-in-class technologies offering reduction of energy consumption while giving you continuous service.
Natively built-in solutions crafted to give you the optimal options suitable for your installation including:
- Built-in Hydronic pump
- Ultra fast-capacity recovery in less than 180 seconds
- Built-in Auto Transfer Switch
- Built-in Harmonic Electronic Filter
Designed for the Data Center
Outstanding performances :
- High COP up to 3.3 and IPLV up to 5.6
- Total harmonic distortion <5%
- Carrier flooded shell-and-tube evaporator with new copper tubes for low pressure drops
Low energy consumption :
- High Efficient chiller with latest 06Z compression technology
Service continuity & redundancy :
- Ultra-fast cooling capacity recovery <180s once power is restored
Built-in solution :
- Integrated ATS & active harmonic filters
SmartVu™ control
- Intuitive and user-friendly, coloured, 7"" interface
- 10 languages available
- Easy access to the controller box
- Password protection
- Night-mode
- Energy management
Remote management as standard
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Start/Stop of the machine
- Dual set-point management
- Water pump control
- High static fan (120Pa)
- High Speed fan (60Hz)
- Low Noise (Sheet Metal enclosure )
- Super Low Noise
- E-coating
- ASME Heat Exchanger
- IP54 Control box
- J-Bus Gateway
- Bacnet Gateway
- Lon Gateway
- Energy Management Module
- 7’’ Touch Screen
- Remote Controller
- EMC Classification C2
- Ultra Fast Capacity Recovery
- Lead/Lag Control
- Compressor with Induction Motor
- Water Exchanger Frost Protection
- Evaporator and hydronic kit Anti-freeze protection
- ATS (Automatic Transfer Switch)
- Compressor Discharge Valves
- 1.6Mpa Evaporator
- Reversed Evaporator Connection
- Evaporator with aluminium jacket
- 38mm Evaporator Insulation
- Spring Damping
- Isolate valve for safety valve (Dual safety valve)
- Flange Connection
- AHF THiD 5% (unit mount)
- Water side plate with aluminium spray coating
Designed for the Data Center
Outstanding performances :
- High COP up to 3.3 and IPLV up to 5.6
- Total harmonic distortion <5%
- Carrier flooded shell-and-tube evaporator with new copper tubes for low pressure drops
Low energy consumption :
- High Efficient chiller with latest 06Z compression technology
Service continuity & redundancy :
- Ultra-fast cooling capacity recovery <180s once power is restored
Built-in solution :
- Integrated ATS & active harmonic filters
SmartVu™ control
- Intuitive and user-friendly, coloured, 7"" interface
- 10 languages available
- Easy access to the controller box
- Password protection
- Night-mode
- Energy management
Remote management as standard
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Start/Stop of the machine
- Dual set-point management
- Water pump control
- High static fan (120Pa)
- High Speed fan (60Hz)
- Low Noise (Sheet Metal enclosure )
- Super Low Noise
- E-coating
- ASME Heat Exchanger
- IP54 Control box
- J-Bus Gateway
- Bacnet Gateway
- Lon Gateway
- Energy Management Module
- 7’’ Touch Screen
- Remote Controller
- EMC Classification C2
- Ultra Fast Capacity Recovery
- Lead/Lag Control
- Compressor with Induction Motor
- Water Exchanger Frost Protection
- Evaporator and hydronic kit Anti-freeze protection
- ATS (Automatic Transfer Switch)
- Compressor Discharge Valves
- 1.6Mpa Evaporator
- Reversed Evaporator Connection
- Evaporator with aluminium jacket
- 38mm Evaporator Insulation
- Spring Damping
- Isolate valve for safety valve (Dual safety valve)
- Flange Connection
- AHF THiD 5% (unit mount)
- Water side plate with aluminium spray coating