AquaForce® - Fixed-speed water-cooled screw liquid chiller & water-sourced screw heat pump 30XWH / 30XWHP
AquaForce® - Fixed-speed water-cooled screw liquid chiller & water-sourced screw heat pump
30XWH / 30XWHP
Refrigerant : R-134a
Compressor : screw fixed-speed
Nominal cooling capacity : 270-1,760 kW
Nominal heating capacity : 320-2,030 kW
The 30XWH heat pumps are the premium solution for industrial and commercial applications where installers, consultants and building owners require optimal performances and maximum quality.
- Low energy consumption
- High reliability
- Easy and fast installation
- Low operating sound levels
- Environmental care
30XWH - Entry-level efficiency
Offer an optimised balance of technical and economical aspects.
30XWHP - Premium-efficiency
Offer unequalled energy efficiency to satisfy the most stringent demands of building owners wanting to reduce operating costs to the minimum.
General description
- Twin-rotor screw compressors with a variable capacity valve
- Refrigerant R134a
- Touch Pilot control system
- Flooded heat exchangers that are mechanically cleanable
- Can provide an evaporator leaving temperature down to 3.3°C (-12°C optional)
- Can deliver up to 50°C (63°C optional) on the condenser side when operating as a heat pump
Low energy consumption
- SEPR up to 8.0 and SEER up to 7.2
- Twin-rotor screw compressor equipped with a high efficiency motor and a variable capacity valve that permits exact matching of the cooling capacity to the load
- Flooded multi-pipe heat exchangers for increased heat exchange efficiency
- Electronic expansion device permitting operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface
Low operating sound levels
- Silencers on the compressors discharge line
- Silencers on the economiser return line
- Acoustic insulation on the components that are most subjected to radiated noise
- Option 257 further reduces the global unit sound level
Easy and fast installation
- Compact design
- Simplified electrical connections
- Simplified hydraulic connections
- Fast commissioning
Environmental care
- R-134a refrigerant with zero ozone depletion potential
- Leak-tight refrigerant circuit
High reliability and easy servicing
- Increased global performance as well as Carrier's acclaimed product quality and reliability
- Major components are selected and tested to minimise failures possibility, as well as many design choices have been taken in this perspective
- Industrial-type screw compressors with oversized bearings and motor cooled by suction gas
- All compressor components are easily accessible on site minimising down-time
- Two independent refrigerant circuits (from 1000 kW upwards); the second one automatically takes over, if the first one develops a fault, maintaining partial cooling under all circumstances
- Auto-adaptive control
- Exceptional endurance tests
06T twin-rotor screw compressor
- Equipped with bearings with oversized rollers, oil pressure lubricated for reliable and durable operation, even at maximum load
- Optimal adjustment of the compressor cooling capacity
- If a fault occurs, the compressor does not switch off, but continues operation with a reduced capacity (unloaded mode)
- The silencer in the discharge line considerably reduces discharge gas pulsations for much quieter operation
- Condenser includes an oil separator that minimises the amount of oil in circulation in the refrigerant circuit and redirects it to the compressor function
SmartVu™ control
- Intuitive and user-friendly, coloured, 4.3" interface
- 10 languages available
- Easy access to the controller box
- Password protection
- Night-modex
- Energy management
Remote Management (Standard)
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Condenser pumps control
- Start/Stop of the machine
- Dual set-point management
- Demand limit setting
- Operation visualisation
Remote management (EMM option)
- Extended remote control possibilities: room temperature, set-point reset, etc.
- Low/Medium-temperature brine solution
- Light-brine solution, down to -3°C
- Unit supplied in two assembled parts
- Lead/lag operation
- Single power connection point
- Evaporator pump electrical power / control circuit
- Evaporator dual pumps electrical power / control circuit
- Condenser insulation
- Service valve set
- Lon, J-Bus or BacNet gateway
- High condensing temperature
- Condensing temperature limitation
- Control for low condensing temperature systems
- Touch Pilot control, 7" user interface
- Leak detection
- Low noise level
30XWH - Entry-level efficiency
Offer an optimised balance of technical and economical aspects.
30XWHP - Premium-efficiency
Offer unequalled energy efficiency to satisfy the most stringent demands of building owners wanting to reduce operating costs to the minimum.
General description
- Twin-rotor screw compressors with a variable capacity valve
- Refrigerant R134a
- Touch Pilot control system
- Flooded heat exchangers that are mechanically cleanable
- Can provide an evaporator leaving temperature down to 3.3°C (-12°C optional)
- Can deliver up to 50°C (63°C optional) on the condenser side when operating as a heat pump
Low energy consumption
- SEPR up to 8.0 and SEER up to 7.2
- Twin-rotor screw compressor equipped with a high efficiency motor and a variable capacity valve that permits exact matching of the cooling capacity to the load
- Flooded multi-pipe heat exchangers for increased heat exchange efficiency
- Electronic expansion device permitting operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface
Low operating sound levels
- Silencers on the compressors discharge line
- Silencers on the economiser return line
- Acoustic insulation on the components that are most subjected to radiated noise
- Option 257 further reduces the global unit sound level
Easy and fast installation
- Compact design
- Simplified electrical connections
- Simplified hydraulic connections
- Fast commissioning
Environmental care
- R-134a refrigerant with zero ozone depletion potential
- Leak-tight refrigerant circuit
High reliability and easy servicing
- Increased global performance as well as Carrier's acclaimed product quality and reliability
- Major components are selected and tested to minimise failures possibility, as well as many design choices have been taken in this perspective
- Industrial-type screw compressors with oversized bearings and motor cooled by suction gas
- All compressor components are easily accessible on site minimising down-time
- Two independent refrigerant circuits (from 1000 kW upwards); the second one automatically takes over, if the first one develops a fault, maintaining partial cooling under all circumstances
- Auto-adaptive control
- Exceptional endurance tests
06T twin-rotor screw compressor
- Equipped with bearings with oversized rollers, oil pressure lubricated for reliable and durable operation, even at maximum load
- Optimal adjustment of the compressor cooling capacity
- If a fault occurs, the compressor does not switch off, but continues operation with a reduced capacity (unloaded mode)
- The silencer in the discharge line considerably reduces discharge gas pulsations for much quieter operation
- Condenser includes an oil separator that minimises the amount of oil in circulation in the refrigerant circuit and redirects it to the compressor function
SmartVu™ control
- Intuitive and user-friendly, coloured, 4.3" interface
- 10 languages available
- Easy access to the controller box
- Password protection
- Night-modex
- Energy management
Remote Management (Standard)
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Condenser pumps control
- Start/Stop of the machine
- Dual set-point management
- Demand limit setting
- Operation visualisation
Remote management (EMM option)
- Extended remote control possibilities: room temperature, set-point reset, etc.
- Low/Medium-temperature brine solution
- Light-brine solution, down to -3°C
- Unit supplied in two assembled parts
- Lead/lag operation
- Single power connection point
- Evaporator pump electrical power / control circuit
- Evaporator dual pumps electrical power / control circuit
- Condenser insulation
- Service valve set
- Lon, J-Bus or BacNet gateway
- High condensing temperature
- Condensing temperature limitation
- Control for low condensing temperature systems
- Touch Pilot control, 7" user interface
- Leak detection
- Low noise level
Documents
